Mco Hospital Aids Private Limited

Description:   Relyon mesh is constructed of  knitted undyed filaments of  Monofilament Polypropylene.

Length(Cm):  Length of the mesh is not less than 95% of the length stated on the label.

Width (Cm):  Width of the mesh is not less than 95% of the length stated on the label   

Average Mesh Density (Gm/Sq.M):  Ten meshes of same size are taken and weighed and average  weight is taken. Weight in gram divided by average area of the mesh, determined  by multiplying the length and width in Metre gives the average density in gram / Sq. metre. (Limit: 120 +/- 5 Gram)

Average Thickness (mm):  Thickness of  ten meshes is measured using a dial gauge and   the average is taken   (Limit: 0.69 mm to 0.74 mm)                  

No. of pores in between one inch length:16

Height of  pore:  0.85 to 0.89 mm

Width of pore:  0.83 to 0.87 mm

Linear Tensile Strength: Not less than 15 Kgf   

Tear Resistance: Not less than 4.5  Kgf

Burst Strength: Not less than 12 Kg/Sq.Cm

Suture Pull out Strength: Not less than  4.0 Kgf

Sterility Test: Complies when tested as per U.S.P. 33 rd edition.

Description:   Relyon mesh is constructed of  knitted undyed filaments of  Monofilament Polypropylene.

Length(Cm):  Length of the mesh is not less than 95% of the length stated on the label.

Width (Cm):  Width of the mesh is not less than 95% of the length stated on the label   

Average Mesh Density (Gm/Sq.M):  Ten meshes of same size are taken and weighed and average  weight is taken. Weight in gram divided by average area of the mesh,                        determined  by multiplying the length and width in Metre gives the average                         density in gram / Sq. metre. (Limit: 120 +/- 5 Gram)

Average Thickness (mm):  Thickness of  ten meshes is measured using a dial gauge and   the average is taken   (Limit: 0.69 mm to 0.74 mm)                  

No. of pores in between one inch length:16

Height of  pore:  0.85 to 0.89 mm

Width of pore:  0.83 to 0.87 mm

Linear Tensile Strength: Not less than 15 Kgf   

Tear Resistance: Not less than 4.5  Kgf

Burst Strength: Not less than 12 Kg/Sq.Cm

Suture Pull out Strength: Not less than  4.0 Kgf

Sterility Test: Complies when tested as per U.S.P. 33 rd edition.

Description:   Relyon mesh is constructed of  knitted undyed filaments of  Monofilament Polypropylene.

Length(Cm):  Length of the mesh is not less than 95% of the length stated on the label.

Width (Cm):  Width of the mesh is not less than 95% of the length stated on the label   

Average Mesh Density (Gm/Sq.M):  Ten meshes of same size are taken and weighed and average  weight is taken. Weight in gram divided by average area of the mesh,                        determined  by multiplying the length and width in Metre gives the average                         density in gram / Sq. metre. (Limit: 120 +/- 5 Gram)

Average Thickness (mm):  Thickness of  ten meshes is measured using a dial gauge and   the average is taken   (Limit: 0.69 mm to 0.74 mm)                  

No. of pores in between one inch length:16

Height of  pore:  0.85 to 0.89 mm

Width of pore:  0.83 to 0.87 mm

Linear Tensile Strength: Not less than 15 Kgf   

Tear Resistance: Not less than 4.5  Kgf

Burst Strength: Not less than 12 Kg/Sq.Cm

Suture Pull out Strength: Not less than  4.0 Kgf

Sterility Test: Complies when tested as per U.S.P. 33 rd edition.